MOXA NPort 5430 Series
Make up to 4 RS-422/485 serial devices Internet-ready
- Easy-to-use LCM (Liquid Crystal Module) interface for IP address configuration
- Auto-detecting 10/100 Mbps Ethernet
- 4 RS-422/485 ports
- Surge protection for all serial signals (15 KV ESD)
- Supports TCP Server, TCP Client, UDP, and Real COM Modes
- Supports web and Telnet consoles
- Supports SNMP MIB-II for network management
- NPort 5430I come with 2 KV of isolation protection
NPort® 5430-Geräteserver können komfortabel und transparent bis zu vier serielle Geräte mit einem Ethernet verbinden, sodass Sie Ihre seriellen Geräte mit einer einfachen Basiskonfiguration vernetzen können. Die Datenübertragung zwischen den seriellen und Ethernet-Schnittstellen erfolgt bidirektional. Mithilfe von NPort® Geräteservern schützen Sie nicht nur Ihre aktuelle Hardwareinvestition, sondern ermöglichen außerdem die zukünftige Netzwerkerweiterung. Sie können das Management ihrer seriellen Geräte zentralisieren und Managementserver über das Netzwerk verteilen.
Unabhängige Betriebsmodi für jeden seriellen Port
NPort 5430-Geräteserver können zur Verbindung verschiedener Geräte für Remote-Datenabruf, Ereignisverarbeitung oder Daten-Multicasting über ein TCP/IP-Netzwerk verwendet werden. Jeder serielle Port des NPort® 5430 funktioniert unabhängig, um maximale Vielseitigkeit zu bieten. Port 1 kann z. B. im Treibermodus betrieben werden, Port 2 im TCP-Server-Modus und die Ports 3 und 4 im TCP-Client-Modus.
Easy-to-use Serial Device Server
The built-in LCM human-machine interface displays all configuration parameters,and includes 4 buttons for inputting data, or for selecting the operation mode, making it easy to set up server parameters, including IP address, netmask, and gateway address. Furthermore, you can also monitor server status and data transmission, eliminating the need to prepare additional PCs during installation.
Real COM/TTY Port
NPort 5430 works like an add-on multiport serial board to the Windows host, but with one major advantage—the TCP/IP network. With NPort’s Real COM/TTY drivers, the serial ports on NPort 5430 are recognized as Real COM ports by the Windows operating system, or Real TTY ports by Linux environments. The usual transmit/receive data signals are provided for RS-422, and 2-wire and 4-wire RS-485.
Ethernet Interface
Number of Ports
1
Speed
10/100 Mbps, auto MDI/MDIX
Connector
8-pin RJ45
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
Number of Ports
4
Serial Standards
NPort 5410: RS-232
NPort 5430/5430I: RS-422/485 (software selectable)
NPort 5450/5450I/5450-T/5450I-T: RS-232/422/485 (software selectable)
Connector
NPort 5410/5450/5450I/5450-T/5450I-T: DB9 male
NPort 5430/5430I: Terminal block
Serial Line Protection
15 kV ESD protection for all signals
2 kV isolation protection (NPort 5430I/5450I/5450I-T)
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485
1 kΩ, 150 kΩ
Terminator for RS-485
120 Ω
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate
50 bps to 921.6 kbps
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Software
Network Protocols
ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP
Configuration Options
Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel
Liquid Crystal Display on the case
Push Buttons
Four push buttons for convenient on-site configuration
Physical Characteristics
Housing
Metal
Weight
740 g
Dimensions
Without mounting kit: 158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in)
With mounting kit: 181 x 103 x 33 mm (7.14 x 4.06 x 1.30 in)
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Power Requirements
Input Voltage
12 to 48 VDC
Power Consumption
NPort 5410: 350 mA @ 12 V, 190 mA @ 24 V
NPort 5430: 320 mA @ 12 V, 175 mA @ 24 V
NPort 5430I: 530 mA @ 12 V, 280 mA @ 24 V
NPort 5450/5450-T: 350 mA @ 12 V, 190 mA @ 24 V
NPort 5450I/5450I-T: 554 mA @ 12 V, 294 mA @ 24 V
Standards and Certifications
Safety
UL 60950-1, EN 60950-1
EMC
CE, FCC
EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS
EN 55024
Marine
DNV (standard temp. models only)
Medical
EN 60601-1-2 Class B, EN 55011 (NPort 5410/5450/5450I only)
Reliability
Alert Tools
Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
NPort 5410: 205,153 hrs
NPort 5430: 201,699 hrs
NPort 5430I: 114,540 hrs
NPort 5450/5450I: 206,903 hrs
NPort 5450-T/5450I-T: 206,903 hrs
Ordering Information | |
NPort 5430 | 4-Port RS-422/485 Serial Device Server |
NPort 5430I | NPort 5430, w/ 2 KV isolation |
Above item includes: |
|
Accessories | |
DK-35A | DIN-Rail Mounting Kit (35 mm) |
P/N: 111170000252 | Power Adaptor |
DR-X-24 | DIN-Rail Power Supply (X for different power rates) |